HYT watch-H3

After shocking the world of mechanical clocks with the H1 and H2 models, the HYT watch team (also known as hydromechanical watch experts) is ready to surprise H3 and its linear liquid time again.

The 62mm x 41mm rectangular case is made of anthracite PVD-coated titanium and platinum. The surface is treated with micro-spraying. It has a highly complex movement and is characterized by linear time description, so that the designed bellows are relatively End.

The first driver drives the fluid in the upper left corner to advance, thereby driving the time display. Its counterpart on the right compensates for this development in the capillary.

This glass tube with a diameter of less than 1 mm runs in a vacuum, as in the case of the H1 and H2 models, and contains two fluids: the first is a (aqueous) yellow fluid, which is used to indicate time. The second (viscosity-based) translucent liquid opposes the meniscus and separates them.

A rotating dial with four faces arranged along the time display tube indicates the time of day. Each of these faces is graded with 6 hours, which can display 24 hours of the day (from 00 to 23). The balance wheel, counterclockwise minute hand and crown position indicator are located below from left to right (H for timing and R for winding).

The HYT H3 is probably the most complicated timepiece in the brand’s collection. Its two barrels visible through the sapphire crystal back cover can provide 170 hours or 7 days of power reserve. The power reserve indicator is also located on the back. The movement of the manual wound beats at a rate of 21,600 vibrations per hour.

Buy HYT H3 Platinum and Charcoal Grey PVD Titanium 361-TP-01-GF-AG

Case: Platinum and Charcoal Grey PVD Titanium
Case diameter :62.00 x 41.00 mm
Movement:Manual